Category: DIY

What are Your Choices When Purchasing an Embroidery Machine?

Generally, there are two types of embroidery machines with almost the same functionality. There is the embroidery machine whose task is only to do embroidery and then the embroidery sewing machine which is versatile. It can do both embroidery and sewing. These machines decorate and add unique styles to fabrics. There are many brands of these machines and they come in different sizes.

the embroidery machine

If you want to purchase an embroidery machine, you need to keep in mind that they come in different prices. Embroidery sewing machines are quiet expensive more than the embroidery-only machines. Prices of these machines mainly depend on the size of the machines itself and also the size of embroidery. They range from $200 to about $8000 dollars.

It is important to also consider the functionality of the machine. If you want to take home an embroidery machine, ask yourself what you want to do with it. If you are specifically oriented in embroidery work alone, then opt for the embroidery only machine. However, if you want an all-in-one machine that will give you the privilege of sewing and also adding embroidery on the fabric, then an embroidery sewing machine will be the best option.

Embroidery sewing machines usually have hoops. During embroidery the fabric is attached to the hoops that are connected to the sewing machines. These hoops hold the fabric firmly to prevent any movements until the machine finishes crafting the desired design. On the other hand, embroidery only machines lack a tool to hold the fabric. Instead, they are fitted with stabilizers.  Some of these stabilizers are found on top of the fabric, while others are found under the fabric. Heat away stabilizers are usually recommended because they leave no trace when ironed.

Some of the embroidery sewing machines are fitted with stitch regulators which enhances more stitches for the sewers who prefer the free motion embroidery.

In the market today, there are three main types of embroidery machines namely;

  • Mechanical embroidery sewing machines
  • Electronic embroidery sewing machines
  • Computerised embroidery sewing machines

All these three machines have their benefits. Let us take a look and compare these different categories of embroidery sewing machines;

Mechanical Embroidery Sewing Machine

Mechanical Embroidery Sewing Machine

This is the simplest style of embroidery sewing machines. They were invented almost 200 years ago and are still used up to date. They were manually controlled by a rotary wheel.  The most common brands still on the market are Brother and Singer. A number of people still prefer to use these embroidery sewing machines.

These machines are not so easy to work with. You need to have a mastery of high skills in embroidery. These embroidery sewing machines have a few numbers of stitches. One of the major advantages is that there quiet cheap as compared to the others. So if you are facing financial constraints, this will be your best alternative. These embroidery machines come in handy when creating antiques and vintage pieces.

Electronic Embroidery Sewing Machine

Electronic Embroidery Sewing Machine

This machine is more popular than the mechanical one. Quiet a number of people who practice embroidery prefer using electronic embroidery sewing machine because it is easier to operate. They are lighter, convenient and easy to carry. An added advantage is that they have more stitches than the mechanical ones and also have a number of more accessories.

This machine widens the scope of your creativity because it is easy to manipulate. Hence, it allows you to be more creative and come up with extra designs. Available models include Brother, Singer, Viking and Kenmore.

Computerized Embroidery Sewing Machines

Computerized Embroidery Sewing Machines

In the modern era, technology has evolved a great deal. It has made these machines very easy to use. They use a very advanced form of technology to function. You can easily make a complex design that would have taken days to craft using hands in a matter of minutes. These embroidery machines are very expensive but they render services that are worth your money.

Their automatic functions include;

  • Needle threading
  • Mirror imaging
  • Touch display screens
  • Multiple needle positions
  • Very many stitch functions
  • Autopilot features

It also has added features like USB ports and allows internet connection where you can download desired patterns. These machines contain a microprocessor that allows you store patterns from a card and create the patterns on its own.

The only disadvantage being the pricing, this is the ideal embroidery machine for you, whether for commercial purposes or personal reasons. Some of the common models include Singer CE-200 Quantum Futura, Brother SE270D and Singer Quantum XL-6000.

In conclusion, you should critically analyse whether you want an embroidery sewing machine or embroidery only machine. Ask yourself for what purposes do you need it. Take it to consideration your needs and budget. Also do a thorough market research of what best brand will bring you satisfaction because different models have different features. Then with all that in mind, find a reputable dealer, make an informed purchase and put your embroidery skills into use.

THE STEPS FOR USING AN EMBROIDERY MACHINE

Today we enter the heart of the matter because we will embroider a design with the computer embroidery machine! I chose a breathtaking free pattern made with four colors of thread (the steps that I will describe apparently remain the same regardless of the number of changes the pattern).

1st step: defining the location of the pattern on the fabric embroidery

This is a MANDATORY step. Be careful with the size of the pattern (observe proportions compared to the garment embroidered or object) and its location on the fabric.

Tip: If you can, print your design in actual size to visualize its location. Otherwise, please refer to the pattern dimensions of the tissue or to create you a very simple template paper.

I printed my motive, then placed the sheet under to assess its size and position.

Then only make a mark on the fabric (usually, we take as a reference the center of the pattern, but it can happen that one may need to take the edges of the pattern as a guide, when embroiders series models for example).

Step 2: placing the fabric in the embroidery frame

After scoring embroidery marks on the tissue, the “stuck” in the framework and that is where lies the thorny question, “Should I use a stabilizer material every time?”. In theory, professionals will tell you that yes, it’s better. Now I will give you my reflections on the subject.

The reinforcement does not seem necessary if:

– The fabric is thick and not likely to move in the frame (for example, upholstery fabric or denim spandex SANS);
– The reason is simple, without dense filling, and small (like embroidered monograms on my dragees bags);
– If you just want to test a reason: I do my testing on scraps of upholstery fabric (on the back if the material is printed), and I do not use reinforcement (no small savings! )

By cons, it is best to:

– The fabric is light: cotton for example;
– The structure is distorted: knitwear, jersey;
– You embroider sponge;
– You decorate delicate fabrics like organza or silk.

In these two latter cases, it is even necessary to place a water-soluble on the fabric. But I will talk next time these particular situations.

The fabric I chose was quite light and dense pattern, I stuck the water-soluble fabric reinforcement in my (with a little spritz of glue for embroidery there is no need to put too much), then j ‘I stuck my fabric and the stabilizer in the embroidery frame. To position it correctly in the frame, I used the plastic template provided. This grid allows you to place your fabric straight in the frame to check that the embroidery frame is correctly positioned and that the pattern itself is well understood in the embroidery field.

Tip: I deliberately placed the center of my most downright design possible on my part because the model is relatively small compared to my surroundings, so I can recover a larger piece of water-soluble surplus after embroidery (for reuse with smaller frames, for example, or for sewing buttonholes).

Once the fabric correctly in the frame is tightened the screw and pulling the sides of the fabric to remove any slack in the structure, it should not remain “beads” (remember to use the small key used unscrewing crowbars came with your machine to tighten the screws of the frame or even a screwdriver!). Be careful not to tighten either over, nor too soft fabric, the aim of the game is not able to make a tambourine !!

Step 3: The machine performs embroidery

It sets the framework of the machine, selects the pattern and adjusting the position of the plan about the benchmark which was drawn: by changing the position of the pattern; the frame moves, until the needle is correctly positioned above the mark:

If you have several changes of a son, put your spools in their “order of appearance” next to the machine, the color changes will be faster and be less likely to go wrong in the colors.

It sets up the can (with special yarn bobbin for embroidery), is slipped over the first color to be embroidered and you can start embroidering. It is held the line of embroidery at the beginning for a few points and then once the embroidery is started, it stops the machine to cut the excess of this thread (if you do not, it may be taken in embroidery and then it will be harder to cut).

When the embroidery of the first color is completed, the second coil is threaded and is repeated as before. This is done until the completion of the embroidery.

Step 4: Finishing

Once the embroidery, the frame of the machine is removed, loosen the screw of the frame, and the fabric is removed. We cut small son protruding on top of the embroidery, but not those below unless the back of the embroidery is visible (as a scarf for example). Reinforcing the excess is removed by cutting around the embroidery and taking care not to cut the son.

Tip: If you plan to stitch decorative stitches (as below) or a buttonhole near your cause, do not remove the reinforcement immediately, but cut it after doing your sewing because the decorative embroidery and buttonholes out better with reinforcements.

You then left to spend your fabric with water to dissolve the water-soluble (dissolves mine to 35 °).

And that’s a lovely embroidery done in less than 20 minutes!

 

HOW TO USE GAS CYLINDERS FOR THE BARBECUE IN CAMPING

We get this additional period many questions about gas cylinders. To cook on camping or barbecue, you need a gas bottle, but what type of cylinder you need and what about the return and exchange? We put the most frequently asked questions in a row. Remember to find some camping meal ideas in advance

This depends on the purpose for which you are going to use the gas cylinder. Come to our store, our experienced staff to help you on your way!

Yes, gas cylinders we can exchange us for a full in our assortment. You pay only for the filling. We ensure proper disposal of empty bottles.

Last spring has changed the rules around the green Calor gas bottle but now revised again. Stating that exchange after May 1 was no longer possible, no longer apply. What about now?

  • Green gas cylinders under the age of 10 years if ingested or a fee of € 4.25.
  • Easy Blue 5 KG gas bottle (to be owned). Purchase price: € 44.95, padding: € 16.95
  • Natural Blue 6 KG lightweight steel (deposit). Purchase price: € 44.95, filling: € 19.95 / deposit € 25, –

This can be done in different ways:

  • In a steel cylinder, you can use the gas level indicator of Bo-camp. This indicates the gas level after a few minutes.
  • Weigh the cylinder. The gas cylinder is empty weight (tare) of the bottle. Weigh the cylinder and pull the empty weight from the total weight. This is the net volume of the cylinder.

This depends on the device you will use. On the unit always indicates the pressure regulator you need. Turn not from here.

Which can? Bottle transport always upright with the gas up and make them always firmly. Always close the gas tap and pull the bottle out of the car when you reach your destination. just leave an empty gas cylinder filled at an approved filling station or exchange it for a full one.

  • Always keep a bottle upright in a cool, well-ventilated place.
  • Never in the sun and dig him out.
  • A gas cylinder transport also upright with the gas up and make them always firmly.
  • Always use a pressure regulator and an approved propane hose. The pressure regulator must be replaced every five years. The house every two years. Periodically check the rubber ring not dried out or cracked. This prevents that gas may leak.
  • Put cylinders always can not accumulate in the space in a well-ventilated area, so that any gas released.
  • Always make sure that when connecting or changing gas cylinders, non-smoking and there is no open flame in the area.
  • Turn off the tap after each use, even with empty gas cylinders. Just turn the gas valve open by hand. Never use tools or force to loosen a faucet. Gets you do not open yourself the gas, bring the bottle back to the store.
  • Just leave an empty gas cylinder filled at an approved filling station or exchange it for a full one. This can join us!

And further

Barbecuing can always and I can not imagine that you will not do this again. The local supermarket has solid enough meat in the range and at some sites, you can even rent entire barbecue packages. Serve with some salads and more to you also do not need.

Despite the fact that you are on the site, and you will probably cook for yourself, you establish a few times to eat or you can get something. The better sites often have several menus where you can choose things from which you can then take to your tent. French fries or a slipped pizza always tastes like something better if you can munch out for your tent.

And when you do yourself for eating should ensure the evening but do not want to stand tall above the pans, then you can also opt for to serve tasty sandwiches. And it’s easy to make I put a few of my favorite recipes in a row. That’s sure to be a hit, and you do not already take too much time. For further information, visit http://www.familytentcenter.com/

9 TIPS AND TRICKS TO A GOOD START SEWING

Tip # 1: Define your creative project

Above all, take the time to choose your project carefully. It may meet a need, or just a little fun to create. In all cases, take note of the materials you will need and select your cloth according to your project (the film is very often mentioned).

Internet abounds with free and paid bosses, take the time to choose! HERE you will find various sewing tutorials. We recommend such a simple project, a package or a pouch that allows you to make straight seams and familiarize yourself with the different tools.

Tip # 2: Take your time

We cannot say it enough, but “precipitation is source of error” and often ultimately, frustration. Set yourself some simple goals, cut your project into steps, and affix postage you gradually.

For example, give yourself a night to trace your boss, another for cutting pieces, and a third for assembly.

Tip 3: equip yourself well

There are basic tools any seamstress needs. Among them we can mention:

Sewing scissors: a big pair to cut tissue, and a small pair (type seamstress scissors or embroidery) for precision cuts.

A seam ripper, very convenient to break some seams and buttonholes.

Paper, rulers (flat and round, also called parrot), a pencil and paper roll (to raise and / or draw patterns)

A sewing machine: There are very different from the entry at Lidl and Ikea (80 to 100 €) to more complex machines € 300 to over € 1,000 for major brands such as Brother, Pfaff, Singer or for Bernina the most known. To choose the best, we recommend that section of Little Lemon. You need to equip you the best sewing machines for beginners. If you want to sew by hand, grab needles for hand sewing.

Sewing thread! There are hundreds of colors. If you have a doubt, you might prefer a darker tone than your fabric.

Prodigy pins or clips (for fragile tissues) to assemble your parts.

The tailor chalk (erasable)

Here ! With all this material, you are ready to take your first steps into the wonderful world of fashion! You will find a multitude of sewing items in our online haberdashery.

Tip 4: book yourself a room for sewing

To sew, you need necessarily a space. This can be the dining table dining, office or … The floor directly! Well, to use your sewing machine, a small desk (or table) will be almost mandatory 😉 Book yourself a dish and place net in order to spread out and cut your fabric smoothly.

Tip 5: store and organize!

To store your items, nothing like a sewing box! Often made of plastic, it contains very practical compartments

For those addicted to vintage, you can hunt a worker, the famous sewing boxes of our grandmothers. A stroke sander and paint later and it is like new!

To store your first fabric, a large bag can do the trick. But if you come to collect – like many of us – a chest of drawers can be very convenient. You simply store them as books; slice up, for quick identification. And for those who have space, the ideal is to wrap your fabric on a tube or a cardboard rectangle.

Remember to protect your direct light fabrics so they do not fade with time.

Tip # 6: Prepare your fabric

Whether for clothing or accessories, you need to wash your fabric!

So make sure that you wash them properly

Tip # 7: train yourself

Before actually sewing your project, familiar with your sewing machine, sew straight with parallel lines on a piece of cloth, like cloth or towel. Test different points, ridges varying the voltage and length of points.

If you sew by hand, train yourself to regular items that will inevitably be more aesthetic.

Tip # 8: start blogging!

You have fallen for a fabric; you have your boss and your items? Now is a good time to get started! Here are the main stages of sewing production:

Wash your fabric:

Copy or cut your boss. Be careful if it contains the margins of sewing or not, it will change your cut.

Drop it on your fabric, upside down and draw the contours adding seam allowances if necessary.

Cut your pieces respecting or not a seam margin and pin them together.

Assemble by hand or machine.

Tip # 9: doing a canvas and build

This is a small important tip especially if you sew clothing: doing a painting, i.e. a draft in a tissue close to the final. Build, i.e. sewing with a thread that easily breaks your parts. This will enable you to realize more easily possible changes to your model and you avoid wasting your precious fabric!

We hope that these tips will be helpful for you on the way becoming a tailor.

THE BENEFITS OF FOOD PRESERVATION BY DEHYDRATION

Food Dehydrator allows food drying gently which has the advantage of preserving both all the taste and vitamins for a long time. Check out this sweet dehydration process and its benefits.

How does it work ?

 

The food Dehydrator allows you to simply and effectively dry all types of fresh food: fruit, vegetable, sauce, herb or even soup.

Simply wash and cut the food you want to dry in slices and not too thick (0.5cm maximum) then arrange on the plates of the food dehydrator.

The device will then propel evenly heated air between 40 ° C and 45 ° C for several hours. The dryers are equipped with an automatic timer: Once the programmed drying time, they take care of everything.

The temperature reached by the dehydrator is very soft and does not exceed 50 ° C. This temperature does not cook food but is sufficient to evaporate all the water they contain. Food is then slowly and totally dehydrated.

Keep your food longer

Fresh vegetables dehydrated using a food dehydrator

The advantage of such a process is that it gradually and completely dries food. For better food preservation, dehydration can be supplemented by a vacuum and / or freezing, for example, you can use best vacuum sealer to protect your food. Indeed, water is not the only factor responsible for the oxidation of foods: the temperature and the presence of air are also determining factors. Even in the absence of moisture, vitamins and enzymes oxidise in air.

Dehydration of fruits

APRICOT

Wash the apricots, cut them in half to extract the kernel. Arrange the apricot halves skin side down on the plate drier.

Drying time> 24 to 30 hours

PINEAPPLE

Peel the pineapple and remove the eyes and heart of the pineapple. Cut the fruit into slices or small pieces with a thickness of 0.5 cm.

Drying time> 14 to 20 hours

BANANAS

Peel the bananas and cut them into slices or rings of 0.3 to 0.5 cm thick.

drying time> 8 to 12 hours

HERRIES

Wash, remove the stalks and stone the cherries. Cut in half and place them on food dehydrator plate face down.

Drying time> 18 to 22 hours

FIGUES

Wash the figs. You can leave them whole (longer drying time) or cut into slices.

Drying time> 25 to 30 hours

STRAWBERRIES

Wash and hull strawberries. Cut into thin slices 0.5 cm thick.

Drying time> 10 to 15 hours

KIWI

Peel the kiwis and cut into slices 0.5 cm thick.

drying time> 10h till 18h

BLACKBERRY

Wash the blackberries and arrange them on the food dehydrator tray.

Drying time> 14 to 20 hours

PEARS

Wash, seed and cut the pears into slices of 0.5 cm. You can also split the four.

Drying time> 12 to 20 hours

APPLES

Peel the apples and remove the seeds. Cut into slices of 0.5 cm in thickness.

Drying time> 15 to 20 hours

PLUM

Wash the plums and cut them in half to remove the kernel. Incise the skin of the fruit to encourage dehydration.

Drying time> 24 to 30 hours

GRAPES

Wash the grapes and remove the stalks them.

Drying time> 25 to 30 hours

TOMATOES

Wash and hull the tomatoes. Cut into 0.5 cm thick. For the cherry tomatoes cut them just two and arrange on the plate of food drying the skin side down.

Drying time> 10 to 12 hours

Conservation dehydrated foods

A healthy diet

Drying food in the food dehydrator is at a mild temperature. Unlike a furnace, the drier does not submit the food to a temperature above 50 ° C. In this way all the flavors and vitamins, enzymes and nutrients minerals are perfectly conserved.

Dehydrated fruits and vegetables are the same nutritional benefit than raw food; the use of a dehydrator is particularly recommended for a raw food diet or to fill vitamin deficiencies.

Did you know ?

Most vitamins are very sensitive to heat. This is the case of water soluble vitamins are saying that are destroyed from 60 ° C. Water-soluble vitamins are vitamin C, the B vitamins and niacin (PP).

The failure of one of these vitamins can have harmful consequences for your health, so it is advisable to eat a variety of fruits and vegetables throughout the year.

Use a food dehydrator can effectively keep fruits and vegetables in season to enjoy their benefits all year.

Our advice to dehydrate your fruit

The drying time depends directly on the amount of water contained in the fruit, and thus may vary depending on the product quality.

You can also adjust the drying time depending on the rendering more or less crispy expected.

Recommended temperature: 45 ° C